Tools » Saws, Sanders & Drills

Sanders and Grinders

3″ x 24″ Belt Sander

8″ Grinder

Drywall Sander
– with vacuum

Saws

Makita Metal Shear

8 1/4″ Circular Saw

Reciprocating Saw

14″ Makita Metal Chop Saw

10″ Compound Slide Miter Box Saw

10″ Brick Saw with Blade

14″ Gas Cut-Off Saw

3 gallon water tank available
Pump assist – steady 8 minute flow. Need to pump every two minutes for steady flow of water

14″ Tile Saw with Blade

24″ Tile Saw With Blade
10″ blade with a 24″ straight cut and an 18″ diagonal cut

Cement / Asphalt Floor Saw, 14″
– walk behind

Porta Band Saw

Toe-Kick Saw (Crain Model 795)
Cuts flush to the wall with a maximum depth of 3/4″ for removing the thickest underlayments.

Undercut / Under Door Saw (Crain Model 812)
With a 13 AMP motor and 6 1/2″ diameter flush-cutting blade, this saw can full undercut the inside corner even in extremely tight areas. Doors as thick as 1 3/4″ can be undercut without removal. Blade height is adjustable from a flush cut to a maximum of 1 1/4″ off the floor.

Concrete Diamond Chain Saw (ICS Model 660GC)
Gas, 10 Inch Diamond Concrete Chainsaw
Chains are for sale only – $299
(We no longer rent them.)

Hilti 12″ Electric Diamond Saw (Model DCH 300)
Cuts reinforced concrete, granite, brick, masonry blocks, metal beams, steel pipes and rebar. Weighs about 21 pounds, max cut depth is 4 3/4″

Plus blade wear, $35 minimum & $3 per thousandth inch of wear after the first 12 thousandths.

Dry Diamond Blade
12″ and 14″ Diameter

Hilti 12″ Electric Diamond Saw AND Vaccuum

Concrete Floor Grinder & Vac

Edco Dual Disc Floor Grinder
Model 50100 2EC – 1 1/2 HP electric motor. Features counter-rotating discs to prevent machine from pulling side to side, which gives the operator greater control. 22″ working width.

– Grinder with “strip serts”
– Grinder with “Dymaserts”

Edco Dry Only Vacuum
Model 93400. 25 foot hose.
Idea for fine dust control when used with floor grinders, scarifiers, and masonry saws in a variety of indoor and outdoor working environments.

Diteq Floor Grinder with Vac
Model TG8, 2 HP electric motor.
Ideal for: Removing paint, epoxy, thinnest, urethane coatings and cut back adhesives, repairing worn, damaged or spalled concrete and more.
Includes one bag to collect the dust. Extra bags are $15 each.

Concrete Scarifier

8″ Walk Behind Gas Scarifier
– 8″ working width will scarify approximately 350-500 sq. ft. per hour at depth per pass of 1/8″
– Removes traffic lines at 800-1,000 lineal ft. per hour

Ideal for:
– Sidewalk trip hazard repair
– Concrete and coatings removal
– Floor cleaning and/or preparations
– Creating non-slip surfaces
– Traffic line and markings removal

Drills

Drywall Screw Gun

1/2″ Right Angle Drill

Diamond Core Drill – Handheld
MK / Eibenstock

3 gallon water tank available
Pump assist – steady 8 minute flow. Need to pump every two minutes for steady flow of water

MK Diamond Manta III Diamond Core Drill Rig
2-1/2″ steel column with ceiling jack
120 V / 20A Milwaukee drill motor with shear pin

– 2″ Core Bit *
– 2 1/2″ Core Bit *
– 3″ Core Bit *
– 4″ Core Bit *
– 5″ Core Bit *
– 6″ Core Bit *
– 8″ Core Bit *

3 gallon water tank available
Pump assist – steady 8 minute flow. Need to pump every two minutes for steady flow of water

DeWALT Magnetic Drill Press
– 10 amp motor with 2-speed setting
– 4-inch drill for heavy duty applications
– Motor height adjustment
– Magnetic coolant bottle for varied placement
– Overload protection to prevent motor damage
– Tool free change between 3/4-inch Weldon Shank and 1/2-inch keyed chuck
Note: We do not stock drill bits, but can get them upon request.