185 CFM Compressor, Airman – Tow Behind
Tier 4 Compliant

Air Rotary Hammer
Chicago Pneumatic Model: 0014RR
Drill rate (in/min) 18
Hole diameter (in) 1-3/4
Weight (lb) 15
Overall Length (in) 18-1/2
Chuck Type Spring Hex Shank
Chuck size 7/8 x 3-1/4
Note: We do not stock drill bits, but can get them upon request.

Paving Breaker 90 lb. Hammer 60 lb.

50 ft, Air Hose

Point or Chisel

Paving Chisels & Tampers

Scaling Hammer

5′ Edco Ergonomic Chisel Scaler
– High-strength tubular handle and soft foam hand grips for operator comfort
– Ergonomic design lets operator stand upright eliminating backaches
– Requires only 6-8 CFM at 80-90 PSI
Removes: Tiles (vinyl, ceramic etc.) Carpeting, Linoleum, Roofing Materials, Mastics, Waterproofing & More

Daily

Air Hose (nail gun)

 9.00

Nail Guns: 6 penny – 12 penny

31.00

Finish Nailer

31.00

Roofing Nailer

31.00

Sidewall Stapler

31.00

6.5 HP Gas Compressor with Twin Tanks

65.00

1 1/2 HP Wheel Compressor

45.00

2 HP Carry Compressor

36.00

Air Floor Nailer

36.00

Air Floor Stapler (3/8″ Laminate)

28.00

Bostitch Air Stapler

36.00

36′ Biljax 3632T Telescopic Boom Lift
– with Hydraulic Outriggers
Max. Working Height 41′
Max. Platform Height 36′
Horizontal Outreach
– Max. From Centerline 32′
– Max. From Edge of Footpad 27′
Load Capacity 500 lbs.
Total Weight 4,200 lbs.

3632T Basic Specs PDF

$996 – week / $2,995 – 4 weeks

3632T Range of Motion

45′ Biljax 4527A Telescopic Boom Lift
– with Hydraulic Outriggers
Max. Working Height   51′
Max. Platform Height   45′
Horizontal Outreach
– Max. From Centerline 27′
– Max. From Edge of Footpad 21′
Load Capacity 500 lbs.
Total Weight 4,200 lbs.

4527A Basic Specs PDF

$209 Half Day / $1,230 – week / $3,395 – 4 weeks

4527A Range of Motion

55′ Biljax 5533A Articulating Boom Lift
– with Hydraulic Outriggers
Max. Working Height   61′
Max. Platform Height   55′
Horizontal Outreach
– Max. From Centerline   33′
– Max. From Edge of Footpad   27′
Load Capacity   500 lbs.

5533A Basic Specs PDF

$269 Half Day / $1,476 – Week / $4,195 – 4 Weeks

5533A Range of Motion

Allen model APC210H Plate Compactor
Maximum Engine Output: 4.8 HP
Plate Size: 23.2″ X 19.7″
Weight: 209 Lbs
Water Tank Capacity: 3.1 Gal

Bomag 45/45 Reversible Plate Compactor
556 Week / 1,395 Month
Dimensions: 19.5″ x 35″ Plate Size
Engine: Honda GX270
Speeds: 91 ft/min
Weight: 749 lbs

ESI EVPC-120H Paving Stone Vibratory Plate Compactor
Rubber coated rollers protect the pavers. Smooth travel over the pavers without chipping the corners and scuffing the paver surface.

Dimension (LxWxH): 26.2″ x 26.4″ x 47.2″
Plate Size (LxW): 25.8″ x 24.4″
Centrifugal Force: 2,315 lbs
Vibration Frequency: 5,640 VPM
Operating Weight: 271 lbs

ESI “Jumping Jack” Plate Compactor
Model ETR50H

Hand Tamper

Sakai Vibratory Asphalt Roller
99.00 Half Day
Trailer – $40
More Information

Concrete Vibrator

Bull Float

Concrete Chute, 12 ft.

Concrete Knee Boards – Set of 2
Wagman Metals, Model WKB1

Electric 1 bag Mixer

Cement Mixer 11 cu. ft.
It will handle up to 7 – 80 lb bags of mix.
Oversized dump wheel with handle grip for easier control while discharging material

MK Diamond Manta III Diamond Core Drill Rig
2-1/2″ steel column with ceiling jack
120 V / 20A Milwaukee drill motor with shear pin

– 2″ Core Bit *
– 2 1/2″ Core Bit *
– 3″ Core Bit *
– 4″ Core Bit *
– 5″ Core Bit *
– 6″ Core Bit *
– 8″ Core Bit *
– 12″ Core Bit *

3 gallon water tank available
Pump assist – steady 8 minute flow. Need to pump every two minutes for steady flow of water

Hilti 12″ Electric Diamond Saw (Model DCH 300)
Cuts reinforced concrete, granite, brick, masonry blocks, metal beams, steel pipes and rebar. Weighs about 21 pounds, max cut depth is 4 3/4″

Plus blade wear, $35 minimum & $3 per thousandth inch of wear after the first 12 thousandths.

Dry Diamond Blade
12″ and 14″ Diameter

MK 14″ Walk Behind Gas Saw
Model X1318
Minimum blade charge, $35 plus wear

Edco 18″ Walk Behind Gas Saw
Model DS-18
Minimum blade charge, $55 plus wear

General Dual Head Surface Grinder
Model SG24EM – 2 HP electric motor.
Designed for breaking up deposits of grease, dirt, rubber carpet backing and industrial residues from floors; cleaning concrete, asphalt and tiles along with a wide range of general concrete grinding job applications. The dual, counter-rotating, multi-accessory discs balance forces to help reduce operator fatigue and enhance machine control.

– Grinder with “Diam-A-Tach” diamond blocks 260.00 Day
– Grinder with “tungsten carbide inserts” 195.00 Day

General Dust Collection Vacuum
Model VS220 DUST-COLLECT-R™ System
25′ of 3″ diameter hose & integral couplers. No parts to Lose!
99% efficient pre-filter
99.97% efficient HEPA secondary filter
Idea for fine dust control when used with floor grinders, scarifiers, and masonry saws in a variety of indoor and outdoor working environments.

8″ Walk Behind Gas Scarifier
– 8″ working width will scarify approximately 350-500 sq. ft. per hour at depth per pass of 1/8″
– Removes traffic lines at 800-1,000 linear ft. per hour

Ideal for:
– Sidewalk trip hazard repair
– Concrete and coatings removal
– Floor cleaning and/or preparations
– Creating non-slip surfaces
– Traffic line and markings removal

Dri-Eaz DefendAir HEPA 500
-Powerful air scrubber and negative air machine

Industrial Fan
– 30″ or 36″ Diameter Floor Fan

Pedestal Fan

Ozone Generator Air Purifier – OdorStop OS3500
This unit is perfect for sanitizing and deodorizing large areas such as hotel suites, offices, homes, basements, and more. It will eliminate even the most severe odors caused by mold, mildew, bacteria, viruses, tobacco, fire and smoke, water and flood damage, animals and more.

It has variable ozone output and a 12 hour timer with a constant on (hold) option, and the ozone plates can be cleaned easily without having to take the unit apart.
View PDF – More Info & Instructions

Functions: 3 Ozone plates + pre-filter + 12-hour timer
Ozone Output: 150 mg/H up to 1800mg/H
Fan Output: 110CFM
Voltage: 120V
Power: 40 Watts
Dimensions: 7.5″h x 9.0″w x 12.5″d
Weight: 10 lbs
Area: 3,500 square feet*

* NOTE: Larger unoccupied areas may be treated when the unit is left to operate for a longer period of time with appropriate circulation and movement of the unit within the area.

Be Power Equipment 2,100 Watt Inverter Generator
$149 per week and $359 per month

– Ultralight and whisper quiet inverter that is easy to transport to bring power to the remotest locations.
– Produces clean energy that is needed for sensitive electronics like cell phones and computers.
– Easy access outlets are protected by circuit breakers for safety.

2,100 Max Watts, 1,800 Running Watts
2x USB PORTS
1x DC 12V@8.3A
2x 120V 20A HOUSEHOLD, NEMA 5-20R
Size: 12″ x 19″ x 19″ Tall
Weight 46 LB

Be Power Equipment 3,500 Watt Inverter Generator
$200 per week and $525 per month

– Quiet and powerful inverter capable of performing many tasks. Especially popular for camping.
– Produces clean energy that is needed for sensitive electronics like cell phones and computers.
– Easy access outlets are protected by circuit breakers for safety.

3,500 Max Watts, 3,000 Running Watts
2x USB PORTS
1x DC 12V@8.3A
2x 120V 20A HOUSEHOLD, NEMA 5-20R
1x 120V 30A TWISTLOCK, NEMA L5-30R
Size: 18″ x 25″ x 20″ Tall
Weight 95 LB
PARALLEL CAPABILITY

3,000 Watt Generator

6,500 Watt Generator

9,000 Watt Generator

#65 Dewalt Demolition Hammer
Includes 1 bit

    – #65 Point or Chisel

    – #65 Paving

    – #65 Tampers

#45 Rotary Hammer

#35 Rotary Hammer

    – Point or Chisel

    – Drill Bit up to 1″

    – Drill Bit over 1″

    – Rerod Driver

    – Carbide Core 2″ bit

    – Carbide Core 2 1/2″ bit

    – Carbide Core 3″ bit

50,000 BTU Diesel / Kerosene Torpedo Heater
Fuel not included

125,000 BTU Diesel / Kerosene Torpedo Heater
Fuel not included

1,500 BTU Electric Heater
Features a 116 CFM fan motor which distributes warm air throughout the room in a way you never thought possible. Instead of using it to warm a small area/personal space like other common space heaters, this heater is meant to raise the temperature of an entire room by circulating the warm air in a much larger area.
– BTU/Hr: 5,100
– Watts: 1,500
– Volts / Amps: 120V / 12.5A
– Thermostat: 32°F – 100°F
– Airflow: 116 CFM
– Weight: 13.7 LBS
– L x W x H: 11″ x 12″ x 8″

Hand Cart

Floor Dolly

Appliance Dolly

PowerMate L-1 Stair Climbing Hand Truck
Specifications

20 Ton Hydraulic Jack

Motor Hoist

Engine Stabilizer

Drywall Lift
    – 11 Foot Lift       $25.00 Half Day
    – 17 Foot Lift       $35.00 Half Day

25′ Material Lift
Sumner Model 2025 Material Lift
25 foot, 650 pound capacity
Features / Specifications
284.00 Week / 465.00 Month

28′ Platform Hoist
Ladder / Shingle Lift
RCG 400 Pro G
28 foot, 400 pound capacity

10′ Fiberglass Step Ladder
$30 weekend

12′ Step Ladder

14′ Step Ladder

16′ Step Ladder

24′ Extension Ladder

32′ Extension Ladder

40′ Extension Ladder

Builders Level
with Tripod & Measuring Stick

Laser Level
with Tripod & Measuring Stick

Transit Level
with Tripod & Measuring Stick

Aluminum Brake
10′ 6″ with cutoff attachment

Heat Gun

Measuring Wheel

1200 lb Cold Water, Electric
Pressure-Pro model EE2012G

2500 lb Cold Water, Gas

– 50′ Extra Hose
– Strip Tip

VC4000 Vapor Steam Cleaner
65 PSI, 5 Liter, Stainless Steel, 28 Pounds
Full Commercial & Powerful Home Use Vapor Steam Cleaner. Brushes are available and are purchased separately. Perfect for cleaning tile and grout, commercial bathroom and kitchen cleaning and more.
More Information and use videos

Haulotte Scissor Lift – Model #1931E
Working Height: 24′ 11″
Platform Height: 18′ 7″
Lift Capacity: 500 pounds
Platform Size: 5′ 8″ x 2′ 5″
Height (stowed): 6′ 6″
Width: 2′ 7″ Length: 6′ 3″
Gradeability: 25%
Power Source: 24V – 225 Amp/h C5
Weight: 2,800 pounds
If dock height then a ramp truck is needed.
We can deliver at ground level for an extra charge or rent you a trailer if you have a 1/2 ton truck or larger.

More specs and pictures

Haulotte Scissor Lift – Model #2632E
Working Height: 32′ 3″
Platform Height: 26′ 3″
Lift Capacity: 500 pounds
Platform Size – outside 7′ 7″ x 2′ 8″
Platform Length – extended 10′ 7″
Height (stowed): 7′ 2″
Width: 2′ 8″    Length: 8′ 2″
Gradeability: 23%
Batteries: 24 V – 225 Ah (C20)
Weight: 4,829 pounds
If dock height then a ramp truck is needed.
We can deliver at ground level for an extra charge or rent you a trailer if you have a 1/2 ton truck or larger.

More specs and pictures

Electric Wall Steamer

Perforator for Vinyl Paper
-Helps Steam Penetrate Better